Instructions

PACELink.co.uk
6-8 Main Street, Kesh, Enniskillen BT93 1TF

RF2 Power Supply
The rf2Link needs to have the RF2 power supply turned on.
Press the Services button on the digibox remote control handset.
Choose option 4 : System Setup
Press 0 1 and Select to bring up the Installer Setup menu.

Choose option 4: RF Outlets
Use the down arrow to move the highlight to Second Outlet Power Supply
Press the right arrow to change OFF to ON
Use the down arrow to move to Save New Settings and press Select
Press Sky to exit the services menu.

Connect the rf2Link coax socket to the RF2 output on the digibox.
The LED on the rf2Link should light.
Connect the 3.5mm jack plug to the TiVo IR socket.
Use a coax flylead to connect to the digibox RF2 if the boxes are too far apart.

How it Works
The rf2Link receives the IR commands from the TiVo and converts them to the control signals required by the Digibox RF2 coax connection. It is powered by the 9 volt supply from the Digibox. You can still connect a DigiMemo or a TV Link to the coax socket on the rf2Link (only with the optional 'through power' version).

Testing
When the rf2Link is connected, the TiVo handset should change channels on the digibox. Please check that the TiVo IR blaster is disabled and test different TiVo codes to find the best one for your digibox.